Show simple item record

dc.contributor.authorElemuren, Raheem
dc.contributor.authorEvitts, Richard
dc.contributor.authorOguocha, Ikechukwuka
dc.contributor.authorKennell, Glyn
dc.contributor.authorOdeshi, Akindele
dc.contributor.authorGerspacher, Regan
dc.date.accessioned2018-11-09T20:42:23Z
dc.date.available2018-11-09T20:42:23Z
dc.date.issuedMay-18
dc.identifierCSME125
dc.identifier.isbn978-1-77355-023-7
dc.identifier.urihttp://hdl.handle.net/10315/35426
dc.identifier.urihttp://dx.doi.org/10.25071/10315/35426
dc.description.abstractIn this study, the effects of flow velocity and solid concentration on erosion-corrosion behavior of AISI 1018 long-radius steel elbows (Schedule 40) in saturated potash brine were investigated. Potash brine containing 10 and 30 wt% of silica sands flowing at 2.5, 3.0, 3.5 and 4.0 m/s through a continuous loop with pipe internal diameter of 2.54 cm was used as the slurry. All experiments were conducted at 30 ºC. The surface damage on elbows was evaluated using scanning electron microscopy (SEM). It was found that material loss per unit area was greater at high slurry velocity and solid concentration. Corrosion pits were visible on the elbow surfaces at low slurry velocities, but pits were not formed at higher velocities. Mechanical damage was concluded to been_US
dc.language.isoenen_US
dc.publisherCSME-SCGMen_US
dc.rightsThe copyright for the paper content remains with the author.
dc.subjectMaterials Technologyen_US
dc.subjectWearen_US
dc.subjectErosion-corrosionen_US
dc.subjectPotash brineen_US
dc.subjectPiten_US
dc.subjectCarbon steelen_US
dc.titleInfluence Of Flow Velocity On Erosion-Corrosion Performance Of 90º Carbon Steel Elbows In Potash Brineen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record