Show simple item record

dc.contributor.authorRaktim, Isha
dc.contributor.authorPop-Iliev, Remon
dc.date.accessioned2018-11-09T19:00:16Z
dc.date.available2018-11-09T19:00:16Z
dc.date.issued2018-05
dc.identifierCSME209
dc.identifier.isbn978-1-77355-023-7
dc.identifier.urihttp://hdl.handle.net/10315/35408
dc.identifier.urihttp://dx.doi.org/10.25071/10315/35408
dc.description.abstractThis paper presents a manufacturing process for extrusion assisted foam production with a physical blowing agent (PBA) for Rapid Rotational Foam Molding. A completely new experimental setup was designed to identify, conceive, establish, and develop, the necessary processing concepts and conditions for fabricating a new class of rotationally molded integral-skin cellular composite having low-density foamed core. The new design incorporates a helical static mixer that can operate at 31 MPa in 200°C environment. Supercritical CO2 will be injected into the pressurized static mixer to thoroughly disassociate into the polymer melt to create a single-phase solution. The process temperature is maintained by PID controlled band heaters and an integral liquid cooling jacket. The system can facilitate rapid pressure drop as high as 30 MPa to produce polyolefin foam.en_US
dc.language.isoenen_US
dc.publisherCSME-SCGMen_US
dc.rightsThe copyright for the paper content remains with the author.
dc.subjectEngineering Analysis & Designen_US
dc.subjectManufacturingen_US
dc.subjectHelicalen_US
dc.subjectStatic mixeren_US
dc.subjectRRFMen_US
dc.subjectPBAen_US
dc.subjectPolyolefinen_US
dc.subjectSupercritical fluiden_US
dc.subjectQFDen_US
dc.subjectCarbon dioxideen_US
dc.titleNew Experimental Setup Design For Applying Physical Blowing Agent In Rapid Rotational Foam Molding Technologyen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


All items in the YorkSpace institutional repository are protected by copyright, with all rights reserved except where explicitly noted.