Show simple item record

dc.contributor.authorAl-Wajid, Wisam
dc.contributor.authorDeiab, Ibrahim
dc.contributor.authorDefersha, Fantahun
dc.date.accessioned2018-11-06T14:04:26Z
dc.date.available2018-11-06T14:04:26Z
dc.date.issued2018-05
dc.identifierCSME191
dc.identifier.isbn978-1-77355-023-7
dc.identifier.urihttp://hdl.handle.net/10315/35246
dc.identifier.urihttp://dx.doi.org/10.25071/10315/35246
dc.description.abstractThe effect of Minimum Quantity Lubrication (MQL) on performance of Friction Stir Welding (FSW) process for Aluminum Alloy 6061-T651 plates was investigated. MQL was used as a cooling and lubrication medium. Five different levels of rotational speed and three feed speed ranges with and without MQL were tested. The effect of MQL on the mechanical properties of the weld joints was studied throughout means of Ultimate Tensile Strength (UTS) tests. Statistical analyses were run to study the relationship between certain process parameters and response. The results showed that the average UTS of the welds is improved when MQL was applied to most of the process variables. The highest UTS was achieved at spindle speed with 1600 rpm and with feed rate 180 mm/min due to improvement of the grain growth.
dc.language.isoenen_US
dc.publisherCSME-SCGMen_US
dc.rightsThe copyright for the paper content remains with the author
dc.subjectManufacturingen_US
dc.subjectComponent
dc.subjectFSW
dc.subjectFriction stir welding
dc.subjectMQL
dc.subjectAluminum alloys
dc.subjectAA6061-T651
dc.subjectStatistical analysis
dc.titleThe Effect Of Minimum Quantity Lubrication On The The Fsw Process Performanceen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


All items in the YorkSpace institutional repository are protected by copyright, with all rights reserved except where explicitly noted.