Now showing items 1-6 of 6
Gas Thruster Calibration For Satellite Simulators On An Air Bearing Table
This paper covers a simple method of calibration for gas thrusters for the application of simulated space flight. Gas thrusters are a common means of controlling spacecraft, and proper calibration of such thrusters is ...
Thermal Management of Electrical and Electronic Systems Using PCM
The present experimental research investigates transient thermal performance of a PCM-based thermal management system for cooling electronics components. The proposed system consists of a heatsink that is submerged into ...
Effect Of Additives On Cutting Temperature Of Glass Fibers Reinforced Polymers
Composites are abrasive materials that generate heat during machining operations. This heat generates thermal damage locally and may severely alter the mechanical properties of the components if it exceeds the glass ...
Glass micro-cutting by Spark Assisted Chemical Engraving
Glass remains a difficult to machine material. Its brittleness, chemical resistance and relatively high thermal conductivity challenges available technologies. An interesting approach is to the use of hybrid technologies ...
3D Numerical Study Of Hill Mounted VAWT
The ground topography effect on the wind flow is significant. The knowledge of the flow behavior near ground is crucial in the development of wind power, especially in the choice of suitable sites and for estimation of ...
The Libration Stabilization Of A Partial Space Elevator System Using Analytical Reel Rate Control
This paper investigates the libration stabilization control of a partial space elevator system with a moving climber in circular orbits. The system is described by a modified two-piece dumbbell model. The model consists ...