Microfluidic method of viscosity measurement in propane-saturated bitumen

Loading...
Thumbnail Image

Date

May-18

Authors

Kim, Mira
Mosavat, Nader
Sinton, David

Journal Title

Journal ISSN

Volume Title

Publisher

CSME-SCGM

Abstract

In this paper, the viscosity propane-saturated bitumen was measured through a microfluidic chip. Property measurement of propane-saturated bitumen has been traditionally done on a heavy-duty PVT cell, and the application of microfluidics in high temperature and pressure conditions to measure the properties of bitumen is a novel technique. There are two steps in the viscosity measurement of propane-saturated bitumen. First, the propane saturated bitumen is prepared in a high-pressure piston cylinder through propane injection in bitumen at a pressure above its saturation pressure. This propane-bitumen sample is left to saturate till it there is no further pressure drop. Then the propane-saturated bitumen is pushed through the microfluidic chip and the viscosity of the bitumen is measured by the pressure differences and the imaging of the fluid end, as an application of the Poiseuille’s law.

Description

Paper presented at 2018 Canadian Society of Mechanical Engineers International Congress, 27-30 May 2018.

Keywords

Engineering Analysis & Design, Fluid Mechanics, Mechanical Engineering Education, Bitumen, Oil sands, Microfluidics, Propane, PVT, Viscosity, Diffusion

Citation