Show simple item record

dc.contributor.authorYazdanmehr, Amir
dc.contributor.authorJahed, Hamid
dc.date.accessioned2018-11-09T16:06:06Z
dc.date.available2018-11-09T16:06:06Z
dc.date.issued2018-05
dc.identifierCSME097
dc.identifier.isbn978-1-77355-023-7
dc.identifier.urihttp://hdl.handle.net/10315/35390
dc.identifier.urihttp://dx.doi.org/10.25071/10315/35390
dc.description.abstractShot peening is a process widely used in industry to improve the fatigue life of materials through induced compressive residual stresses that retard crack initiation and growth. In the peening process, there are two stages: 1) loading: shot penetrating into target; and 2) unloading: shot rebounding from the target. The strain rates in the loading process are known to be in 105-106 1/s range, having heavy impact on the materials’ properties. However, the effect of the loading strain rates on the rebounding stage is not well studied. This paper aims to determine the effects of the loading strain rates on the unloading behavior of a material using FEM method. First, to better understand the material behavior, this study evaluates the loading-unloading responses of one element at high strain rates in different scenarios. Then, it obtains the strain rates during the loading and unloading for the different elements of a material being impinged by one shot. The results show that the unloading behavior of a material depends only on the loading equivalent plastic strain and the strain rate of the unloading step.en_US
dc.language.isoenen_US
dc.publisherCSME-SCGMen_US
dc.rightsThe copyright for the paper content remains with the author.
dc.subjectEngineering Analysis & Designen_US
dc.subjectShot peeningen_US
dc.subjectHigh strain rateen_US
dc.subjectLoading-unloadingen_US
dc.titleEffect Of Loading Strain Rates On Unloading Behavior Of Shot Peened Materialsen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record