Now showing items 41-46 of 46
Preparation And Characterization Of Graphene Oxide Cross-Linked Composites
Graphene oxide (GO)-based materials have been studied for applications in adsorption and water treatment. Experimental results revealed that GO is a promising adsorbent due to its low-cost production, large surface area, ...
On Microstructure And Corrosion Properties Of Selective Laser Melted 316L Stainless Steel
In this study, a laser additive manufacturing method, known as selective laser melting (SLM), was applied to produce cube blocks of 316L stainless steel. The microstructure and corrosion properties of the produced samples ...
High Strain-Rate Behavior Of Mechanoluminescent Material Dispersed In A Soft Polymer Matrix
Mechanoluminescence (ML) is the emission of light from a solid material in response to mechanical stimuli . Mechanoluminescent materials are classified based on the types of stress activation required for luminescence ...
A Finite Element Model To Predict The Effect Of Porosity On Elastic Modulus In Low Porosity Materials
The effect of porosity on elastic modulus in low porosity materials is investigated. First, several models used to predict the reduction in elastic modulus due to porosity are compared with a compilation of experimental ...
Graphene Oxide Reinforced Bio-Epoxy Polymers
The majority of epoxy/graphene oxide (GO) composite studies have been conducted on synthetic epoxies. This work presents the results on GO filler loadings of 0.1, 0.2 and 0.3 wt. % to a green bio-epoxy polymer. GO was ...
Thermal Management of Electrical and Electronic Systems Using PCM
The present experimental research investigates transient thermal performance of a PCM-based thermal management system for cooling electronics components. The proposed system consists of a heatsink that is submerged into ...