Search
Now showing items 1-10 of 46
Predicting The Thermal Conductivity Of Epoxy/Mwcnt Composites Using Analytical Modelling
(CSME-SCGM, 2018-05)
Polymer nanocomposites have opened a new path for multifunctional materials. In particular, carbon nanotubes have the potential to be used in various applications. This study focused on the evaluation of thermal conductivity ...
Application Of FBG Optical Sensors To In-Situ Monitoring The Thermo-Mechanical Behaviour Of Cold Spray Coated Samples
(CSME-SCGM, 2018-05)
In this research, a fiber Bragg grating (FBG) sensor is employed for monitoring thermal and mechanical strain induced by severe plastic deformation during high thermal and mechanical strain rate of cold spray technique. ...
Modeling Of Magneto-Mechanical Response Of Magnetorhological Elastomers Having Different Arrangement Of Magnetic Particles
(CSME-SCGM, 2018-05)
A model describing the magneto-mechanical properties of magnetorheological elastomers (MREs) under an external magnetic field and a mechanical shear deformation is presented. The main purpose of the present study is to ...
Continuous Fiber Polymer Composites for Thermal Applications
(CSME-SCGM, 2018-05)
This paper presents an analytical investigation into the effective thermal conductivity of 3D printed continuous fibre polymer composites (CFPCs) using rule of mixture micro-structural analysis. Two fused deposition modelling ...
Evaluation Of Anti-Icing Polymer Coatings
(CSME-SCGM, 2018-05)
Ice accumulation on aircraft, wind turbines and power lines can have detrimental effects, including efficiency reduction, mechanical failures and the creation of safety hazards. The aim of this study is to investigate the ...
A Hybrid Manufacturing Approach For Low Volume High Temperature Thermoplastic / Thermoset Material Molds
(CSME-SCGM, 2018-05)
The mold costs for low volume production molds can be expensive due to the mold material, the process planning time, and the fabrication costs. The focus of this research is to develop a methodology to fabricate molds for ...
Influence Of Flow Velocity On Erosion-Corrosion Performance Of 90º Carbon Steel Elbows In Potash Brine
(CSME-SCGM, 2018-05)
In this study, the effects of flow velocity and solid concentration on erosion-corrosion behavior of AISI 1018 long-radius steel elbows (Schedule 40) in saturated potash brine were investigated. Potash brine containing 10 ...
Development of Absorbents with High Contact Area for Applications in Desiccant Coated Heat Exchanger
(CSME-SCGM, 2018-05)
Desiccant coated heat exchanger (DCHE) is developed from the combination of desiccant absorbents and the conventional fin-tube heat exchanger. The performance of the DCHE is mainly due to the adsorption properties of the ...
Corrosion Performances Of Micro-Arc Oxidation Coatings On Az31B, Az80 And Zk60 Cast Mg Alloys
(CSME-SCGM, 2018-05)
Micro-arc oxidation (MAO) technology is attractive for the surface treatment of Mg alloys for diverse applications because it can be used to form adherent coatings with superior wear and corrosion resistance. In the present ...
Effects of High pressure coolant on machining temperature and machinability of AISI 304 stainless steel
(CSME-SCGM, 2018-05)
Effective zones of high pressure coolant (HPC) have been identified in turning performing a wide range of machining operations on 304 stainless steel using uncoated carbide inserts. The effects of triple coolant jets on ...