Search
Now showing items 1-8 of 8
Continuous Fiber Polymer Composites for Thermal Applications
(CSME-SCGM, 2018-05)
This paper presents an analytical investigation into the effective thermal conductivity of 3D printed continuous fibre polymer composites (CFPCs) using rule of mixture micro-structural analysis. Two fused deposition modelling ...
Development of Absorbents with High Contact Area for Applications in Desiccant Coated Heat Exchanger
(CSME-SCGM, 2018-05)
Desiccant coated heat exchanger (DCHE) is developed from the combination of desiccant absorbents and the conventional fin-tube heat exchanger. The performance of the DCHE is mainly due to the adsorption properties of the ...
Effects of High pressure coolant on machining temperature and machinability of AISI 304 stainless steel
(CSME-SCGM, 2018-05)
Effective zones of high pressure coolant (HPC) have been identified in turning performing a wide range of machining operations on 304 stainless steel using uncoated carbide inserts. The effects of triple coolant jets on ...
Investigation of Latent Heat Thermal Energy Storage System for Air- Conditioning Applications
(CSME-SCGM, 2018-05)
Around 40% of the total energy in USA is consumed by buildings, and about $370 billion US dollar is spent each year to supply this energy and thus reduction in energy consumption is extremely important. One of the most ...
The Design Of Infrared Mirror Coatings For The Enhanced Performance Of Incandescent Lighting
(CSME-SCGM, 2018-05)
Herein we present the design of infrared mirror coatings for the enhanced performance of incandescent lighting. We consider single and stacked dielectric mirrors comprised of alternating layers of TCO and SiO2 nanoparticle ...
Analysis Of Thermal Losses In Air-Water Interfacial Solar Heating Systems
(CSME-SCGM, 2018-05)
This paper reports a numerical analysis of solar-driven seawater desalination systems with two configurations: a floating photo-thermal film at the air-water interface with and without an insulation layer located beneath ...
Investigation into the Influence of Fused Deposition Modeling (FDM) Process Parameters on the Thermal Properties of 3D-Printed Parts
(CSME-SCGM, 2018-05)
The mechanical properties of 3D-printed parts have been extensively studied and the effects of printing parameters on them have been investigated. However, there are limited reliable data for the thermal properties of the ...
Thermal Management of Electrical and Electronic Systems Using PCM
(CSME-SCGM, 2018-05)
The present experimental research investigates transient thermal performance of a PCM-based thermal management system for cooling electronics components. The proposed system consists of a heatsink that is submerged into ...