Search
Now showing items 1-10 of 55
Predicting The Thermal Conductivity Of Epoxy/Mwcnt Composites Using Analytical Modelling
(CSME-SCGM, 2018-05)
Polymer nanocomposites have opened a new path for multifunctional materials. In particular, carbon nanotubes have the potential to be used in various applications. This study focused on the evaluation of thermal conductivity ...
Application Of FBG Optical Sensors To In-Situ Monitoring The Thermo-Mechanical Behaviour Of Cold Spray Coated Samples
(CSME-SCGM, 2018-05)
In this research, a fiber Bragg grating (FBG) sensor is employed for monitoring thermal and mechanical strain induced by severe plastic deformation during high thermal and mechanical strain rate of cold spray technique. ...
Buckling Paradox And Anisotropic Plastic Plate Bifurcation
(CSME-SCGM, 2018-05)
Anisotropic elastic/plastic plate bifurcation is investigated. The pre-bifurcation loading consists of biaxial stresses along ξν axes parallel to the sides of a simply supported rectangular plate:
ννξξσασ=,11α−≤≤. The ξν ...
Modeling Of Magneto-Mechanical Response Of Magnetorhological Elastomers Having Different Arrangement Of Magnetic Particles
(CSME-SCGM, 2018-05)
A model describing the magneto-mechanical properties of magnetorheological elastomers (MREs) under an external magnetic field and a mechanical shear deformation is presented. The main purpose of the present study is to ...
Gas Thruster Calibration For Satellite Simulators On An Air Bearing Table
(CSME-SCGM, 2018-05)
This paper covers a simple method of calibration for gas thrusters for the application of simulated space flight. Gas thrusters are a common means of controlling spacecraft, and proper calibration of such thrusters is ...
New Experimental Setup Design For Applying Physical Blowing Agent In Rapid Rotational Foam Molding Technology
(CSME-SCGM, 2018-05)
This paper presents a manufacturing process for extrusion assisted foam production with a physical blowing agent (PBA) for Rapid Rotational Foam Molding. A completely new experimental setup was designed to identify, conceive, ...
The Design And Validations Of The Ultrasonic Tactile Sensor
(CSME-SCGM, 2018-05)
An ultrasonic tactile sensor that can measure the stiffness of the tissue was developed. By combining analytical and numerical approaches, efficient design methodology was presented. The electrical and mechanical performance ...
Effect Of Loading Strain Rates On Unloading Behavior Of Shot Peened Materials
(CSME-SCGM, 2018-05)
Shot peening is a process widely used in industry to improve the fatigue life of materials through induced compressive residual stresses that retard crack initiation and growth. In the peening process, there are two stages: ...
Generating Reuse Possibilities For Retired Wind-Turbine Blades
(CSME-SCGM, 2018-05)
This work examines identifying reuses for wind-turbine blades that are retired when they reach the end of their technical life. Wind-turbine blades are made from fibercomposite materials, for which effective material-based ...
Effectiveness-NTU Relationships of Parallel-Plate Moving Bed Heat Exchangers
(CSM-SCGM, 2018-05)
Moving bed heat exchangers (MBHEs) are used in various industrial processes. Recently, analytical solutions to several MBHE heat transfer problems have been presented in the literature. In this work, the mathematical ...