Now showing items 1-8 of 8

    • 3D Numerical Study Of Hill Mounted VAWT 

      Belabes, Belkacem; Paraschivoiu, Marius (CSME-SCGM, 2018-05)
      The ground topography effect on the wind flow is significant. The knowledge of the flow behavior near ground is crucial in the development of wind power, especially in the choice of suitable sites and for estimation of ...
    • Development And Validation Of A Numerical Model For Vibration Of Power Lines 

      Jalali, Mohammad Hadi; Rideout, Geoff (CSME-SCGM, 2018-05)
      Modal testing is being investigated as a means of non-destructive evaluation of wooden utility pole strength. In order to understand the effects of conductors on the dynamics of the poles, a numerically efficient model ...
    • Effect Of Additives On Cutting Temperature Of Glass Fibers Reinforced Polymers 

      Togue, Honoré Kuate; Chatelain, Jean-François; Ouellet-Plamondon, Claudiane (CSME-SCGM, 2018-05)
      Composites are abrasive materials that generate heat during machining operations. This heat generates thermal damage locally and may severely alter the mechanical properties of the components if it exceeds the glass ...
    • Gas Thruster Calibration For Satellite Simulators On An Air Bearing Table 

      Cookson, Joshua; Zhu, Zheng (CSME-SCGM, 2018-05)
      This paper covers a simple method of calibration for gas thrusters for the application of simulated space flight. Gas thrusters are a common means of controlling spacecraft, and proper calibration of such thrusters is ...
    • Glass micro-cutting by Spark Assisted Chemical Engraving 

      Hof, Lucas A.; Wüthrich, Rolf (CSME-SCGM, 2018-05)
      Glass remains a difficult to machine material. Its brittleness, chemical resistance and relatively high thermal conductivity challenges available technologies. An interesting approach is to the use of hybrid technologies ...
    • The Libration Stabilization Of A Partial Space Elevator System Using Analytical Reel Rate Control 

      Shi, Gefei; Zhu, Zhanxia; Zhu, Zheng H. (CSME-SCGM, 2018-05)
      This paper investigates the libration stabilization control of a partial space elevator system with a moving climber in circular orbits. The system is described by a modified two-piece dumbbell model. The model consists ...
    • Multi-Objective Optimization During Machining Ti-6Al-4V Using Nano-Fluids 

      Hegab, Hussien; Abdelfattah, Waleed; Rahnamayan, Shahryar; Mohany, Atef; Kishawy, Hossam (CSME-SCGM, 2018-05)
      Several properties make titanium and its alloy the primary candidate to attain weight and functional advantages because of its promising properties such as high strength to weight ratio, high corrosion resistivity, and ...
    • Thermal Management of Electrical and Electronic Systems Using PCM 

      Alomair, Yazeed A.; Alomair, Muath; Tasnim, Syed; Abdullah, Hussein A.; Mahmud, Shohel (CSME-SCGM, 2018-05)
      The present experimental research investigates transient thermal performance of a PCM-based thermal management system for cooling electronics components. The proposed system consists of a heatsink that is submerged into ...

      All items in the YorkSpace institutional repository are protected by copyright, with all rights reserved except where explicitly noted.